Subject 8 Meteorology

The Atmosphere

State the composition of the atmosphere

Describe the presence and importance of the following in the atmosphere:

Explain how temperature influences the ability of air to hold water vapour

Define tropopause

State how density of air affects the height of the tropopause in high, middle and low latitudes

Define pressure

Describe what is meant by:

Define:

Explain the relatonship between pressure gradient, isobars and wind velocity (airflow around pressure systems)

State the concept of convergence and divergence and describe how the associated subsidence or ascent of air influences the type of weather commonly associates with pressure systems

State the unit of pressure commonly used in meteorology

List the assumed conditions on which the International Standard Atmosphere (ISA) is based

Explain how a deviation from ISA calues influences performance of aircraft and their engines

Define

Explain why an altimeter requires a subscale adjustment

Explain the importance of correct subscale setting

Temperature and Heat Exchange Processes

Explain what is meant by solar radiation

Describe the elements that influence or reject the amount of incoming solar radiation

Explain what is meant by terrestrial radiation

Descibe the elements that influence or restrict the escape of terrestrial radiation

Explain the effect of solar and terrestrial radiation on the air temperature (in the atmosphere)

Describe the:

Define albedo

Describe the dirunal variation of surface air temperature and explain the effects of different types of surface on the variation

Atmospheric Moisture

Define:

Explain the function of condensation nuclei during condensation

State the effect of the following on the rate of evaporation:

Describe the processes that produce changes of state of moisture and explain how latent heat is involved in each

Explain what is meant by relative humidity

Explain the effects of changes in temperature and moisture content of air on relative humidity

Explain what is meant by dew point

Explain how the effect of moisture content of air opn the value of the dew point

Explain how density of moist air affects aircraft and engine performance

Explain how temperature, relative humidity and dew point values can be used to indicate differences in wter content of air

The Wind

State the direction in which the following to forces act:

State the effect of wind speed on the strangth of the coriolis force

Explain how the inter-relation between pressure gradient and coriolis force determine the circulation around pressure systems

Explain what is meant by the "friction layer", and describe the elements that influence the density of the layer

Explain how the friction layer affects the surface wind velocity

Define:

Describe the diurnal variation of the surface wind:

State the changes in wind velocity when climbing out of, or descending into, the friction layer

State the function of the rotating cup anemometer

Describe how an approximate wind velocity can be determined from a 25-knot windsock when at an angle of 30 degrees, 45 degrees, 75 degrees and 90 degrees from the vertical

Describe how an approximate wind direction can be determined from:

State Buys Ballot's Law

Explain how applying Buys Ballot's Law can:

Define wind shear

Describe the effects of vertical and horizontal wind shear on aircraft operations

[link title[link title[link title]]]==Stability of Air==

Explain what is meant by:

State the two ractors that determine the stability of air

Describe what is meant by "environment lapse rate" (ELR)

Explain the adiabatic process

Draw graphs of steep and shallow environment lapse rates including inversions and isothermal layers

State the dry adiabatic lapse rate (DALR)

Explain how the relationshi[ between the ELR and DALR can be used to determine the stability or instability of unsaturated air

State the saturated adiabatic lapse rate (SALR)

Explain how the relationship between the ELR and SALR can be used to determine the stability or instability of saturated air

Explain the factors involved in thermal rising of air

Describe how different dew point values determine the cloud base of convective cloud, given a constant moisture content

Describe the types of cloud that could be expected in:

Describe weather conditions and degrees of visibility in:

Local Winds

Describe the sea breeze process, including typical:

Describe the land breeze process, and state:

Describe the katabatic and anabatic wind processes, and state the:

Define, and differentiate between, gusts and squalls

Describe the fohn wind process

Given environment temperatures, dew points and mountain heights, determine the:

Describe the flight conditions associated with fohn wind conditions

Describe the mountain mountain wave (standing, or lee wave) process

Explain the wind and weather conditions, and associated main dangers to aircraft operations, in mountain wave conditions

Describe the rotor streaming process and explain the associated dangers to aircraft operations

Explain the dangers involved in attempting to out climb a slope in light aircraft, and describe the alternatives and remedies available under the circumstances

Inversions

Define:

Explain the effect of inversions on:

Describe the flight conditions in the presence of inversions

Explain the factors involved in a:

Cloud

Describe the basic cloud formation process

State the most common method through which:

Explain what is meant by "buoyancy" of air

Differentiate between cloud drops and rain / shower drops

State the approximate altitude limits (in NZ latitudes) of:

Describe the following types of cloud and include a description of likely icing, turbulence and precipitation:

Describe the terms used for the reporting of cloud

Describe the following methods whereby air is lifted, and include the effect of stability / instability on the type of cloud:

Explain the processes that contribute to cloud dispersal

Precipitation

Define

Explain how drops can grow through:

Describe the following types of precipitation:

Describe the following characters of precipitation:

Visibility

Define (meteorological) visibility

Explain what is meant by transparency of air

Explain the effect of illumination on visibility distance

Differentiate between visibility distance and visibility range

Describe the effects of the following on visibility distance:

Explain the factors involved in slant range

Fog

Define fog

Describe the principals of formation, required meteorological conditions, factors affecting extent of, and dispersal of:

Describe the operational problems associated with fog

Fronts and Depressions

Describe the polar front theory

Define airmass

List the airmass catagories

Defne the source region and state of typical global areas where source regions are found

Describe what is meant by:

Explain the typical weather conditions in New Zealand when affected by cold and warm advection

Describe how divergence aloft affects the atmospheric pressure near sea level

Describe how the characteristics of the:

Draw the symbols, and colour codes, used to describe the following fronts on weather charys:

Draw a cross-section of the typical cold front influding cloud, temperature and freezing level changes, precipitation, and typical widgh

State the events before, at, and after, an idealised cold front in terms of:

Draw a cross section of the typical warm front including cloud, temperature and freezing level changes, precipitation and typical width.

State the events before, at, and after, an idealised warm front in terms of:

Draw a cross section of the following occlusions and explain how each type develops:

Describe the potential dangers to FVR flight through fronts

Sescribe the techniques, and precautions that can be taken to reduce or eliminate the dangers of VFR flight through fronts.

Thunderstorms

Explain the conditions to be met for the development of thunderstorms

Describe the three stages of thunderstorm development

Explain the development, and describe the characteristics of:

Describe the haxards associated with thunderstorms and explain why light aircraft should avoid them

Explain the orogin and development of tornadoes and state the main hazards

Icing

Explain what is meant by supercooled water, and describe the influence of latent heat on the formation of ice.

Explain the process of freezing and melting.

With regard to airframe icing, explain the processes involved in the formation of:

(a) clear ice;

(b) rime ice;

(c) hoar frost;

(d) freezing rain.

State the types of cloud, and cloud drop size, that are conducive to the formation of each type of ice listed in

State the altitudes relative to the freezing level where rime ice or clear ice can be expected in cloud.

Give examples of conditions that could cause:

(a) freezing rain.

(b) hoar frost

State the hazards for light aircraft from:

(a) snow;

(b) sleet;

(c) hail.

Explain the influence of the following on the rate of ice accretion:

(a) water content of cloud;

(b) aircraft characteristics, components and airspeed.

State the dangers of icing to aircraft in flight and on the ground.

Explain the methods that can be used to minimise or eliminate the dangers of aircraft icing.

Explain the factors involved in carburettor icing.

State the maximum temperature range in which carburettor ice can form.

Explain how the accretion rate of carburettor ice is governed by:

(a) moisture content of air; and

(b) throttle setting.

Explain the conditions that can cause carburettor icing while on the ground.

Describe the methods commonly available in light aircraft to combat carburettor icing.

Explain the dangers and possible remedies for icing of engine and pitot system intakes.

Turbulence

Describe the cause(s), factors involved, dangers, and techniques commonly used to avoid or minimise:

(a) thermal (convective) turbulence;

(b) mechanical turbulence - small scale and large scale;

(c) wind shear turbulence;

(d) wake turbulence.

New Zealand Climatology

Describe how the following items govern the NZ climate:

(a) latitude;

(b) oceanic surroundings;

(c) topography.

In general terms, describe cloudiness, gustiness, visibility and turbulence at various locations within New Zealand during typical:

(a) northwest wind regimes;

(b) northeast wind regimes;

(c) southwest wind regimes;

(d) southeast wind regimes.

With regard to VFR flight in light aircraft over the Southern Alps, describe:

(a) the need for through flight planning;

(b) in-flight considerations;

(c) adverse winds;

(d) favourable winds;

(e) selection of tracks.


Meteorological Services for Aviation

With respect to NZ Domestic VFR operations, interpret, understand and assess information of all descriptions contained in:

(a) area forecast (ARFOR);

(b) meteorological reports (METAR/SPECI);

(c) trend forecasts (TTL);

(d) aerodrome forecasts (TAF);

(e) SIGMET;

(f) special aerodrome reports (SPAR);

(g) automatic terminal information service (ATIS);

(h) aerodrome and weather information broadcasts (AWIB);

(i) basic weather reports (BWR);

(j) pilot reports.

Interpret, understand and assess weather information made available by television, Internet, newspapers and radio.

See also

This article is issued from Wikiversity - version of the Wednesday, February 10, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.