Physics equations/27-Wave Optics/Q:interference

Equations for this quiz       Solutions(pdf)           Testbank

pe27interference A

1. Two narrow slits are separated by 0.8 mm. The 15-th fringe appears 89 mm from the center of the diffraction pattern, and the screen is 9 m from the slits. What is the wavelength?

a) 3.16E+02 nm
b) 3.59E+02 nm
c) 4.08E+02 nm
d) 4.64E+02 nm
e) 5.27E+02 nm

2. An isotropic sound source is placed at the origin, and another one is placed at x=0.69m and y= 0.71m. A microphone is placed at x=4.9m and y=4.1m. The amplitude of each source is adjusted so that the microphone reads the same intensity,for either source if the other source is turned off. When each source is sounded alone (without the other source), the amplitude is Acos(ωt+φ), where A=8.9. If the wavelength is 0.29m, what is the amplitude when both sources are turned on?

a) 1.39E+01
b) 1.58E+01
c) 1.80E+01
d) 2.04E+01
e) 2.32E+01

3.
Single slit diagram.svg
The minima of single slit diffraction can be calculated using the drawing shown. If the path lengths from A and B cancel, then the same cancellation will occur throughout the slit, with each point between A and B being cancelled by a corresponding point between B and C. If the slit is 81 micrometers wide, and the wavelength is 2.8 micrometers, at what angle does the first minimum occur for single slit diffraction?
a) 1.53E+00 degrees
b) 1.74E+00 degrees
c) 1.98E+00 degrees
d) 2.25E+00 degrees
e) 2.56E+00 degrees

Your score is 0 / 0

pe27interference B

1. Two narrow slits are separated by 0.8 mm. The 11-th fringe appears 96 mm from the center of the diffraction pattern, and the screen is 9.5 m from the slits. What is the wavelength?

a) 6.47E+02 nm
b) 7.35E+02 nm
c) 8.35E+02 nm
d) 9.49E+02 nm
e) 1.08E+03 nm

2. An isotropic sound source is placed at the origin, and another one is placed at x=0.71m and y= 0.89m. A microphone is placed at x=3.3m and y=4.2m. The amplitude of each source is adjusted so that the microphone reads the same intensity,for either source if the other source is turned off. When each source is sounded alone (without the other source), the amplitude is Acos(ωt+φ), where A=4.8. If the wavelength is 0.33m, what is the amplitude when both sources are turned on?

a) 7.07E+00
b) 8.03E+00
c) 9.13E+00
d) 1.04E+01
e) 1.18E+01

3.
Single slit diagram.svg
The minima of single slit diffraction can be calculated using the drawing shown. If the path lengths from A and B cancel, then the same cancellation will occur throughout the slit, with each point between A and B being cancelled by a corresponding point between B and C. If the slit is 92 micrometers wide, and the wavelength is 1.6 micrometers, at what angle does the first minimum occur for single slit diffraction?
a) 8.77E-01 degrees
b) 9.96E-01 degrees
c) 1.13E+00 degrees
d) 1.29E+00 degrees
e) 1.46E+00 degrees

Your score is 0 / 0

pe27interference C

1. Two narrow slits are separated by 0.9 mm. The 17-th fringe appears 67 mm from the center of the diffraction pattern, and the screen is 7 m from the slits. What is the wavelength?

a) 3.04E+02 nm
b) 3.45E+02 nm
c) 3.92E+02 nm
d) 4.46E+02 nm
e) 5.07E+02 nm

2. An isotropic sound source is placed at the origin, and another one is placed at x=0.85m and y= 0.68m. A microphone is placed at x=4.9m and y=4.9m. The amplitude of each source is adjusted so that the microphone reads the same intensity,for either source if the other source is turned off. When each source is sounded alone (without the other source), the amplitude is Acos(ωt+φ), where A=7.5. If the wavelength is 0.45m, what is the amplitude when both sources are turned on?

a) 9.46E+00
b) 1.07E+01
c) 1.22E+01
d) 1.39E+01
e) 1.58E+01

3.
Single slit diagram.svg
The minima of single slit diffraction can be calculated using the drawing shown. If the path lengths from A and B cancel, then the same cancellation will occur throughout the slit, with each point between A and B being cancelled by a corresponding point between B and C. If the slit is 70 micrometers wide, and the wavelength is 2.9 micrometers, at what angle does the first minimum occur for single slit diffraction?
a) 1.42E+00 degrees
b) 1.62E+00 degrees
c) 1.84E+00 degrees
d) 2.09E+00 degrees
e) 2.37E+00 degrees

Your score is 0 / 0
This article is issued from Wikiversity - version of the Sunday, April 26, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.