Circuit Theory/Y Δ

Circuit after Δ Y transformation of top bridge .. can now use parallel/serial combinations rather than source injection to find Thevenin's resistance

The bridge circuit example was solved with source injection, but could have been solved with a Y Δ transformation.

The 5,2 and 3 ohm resistors form a Δ that could be transformed into a Y.

The equations are:

R_{1}={\frac {R_{b}R_{c}}{R_{a}+R_{b}+R_{c}}},R_{2}={\frac {R_{a}R_{c}}{R_{a}+R_{b}+R_{c}}},R_{3}={\frac {R_{a}R_{b}}{R_{a}+R_{b}+R_{c}}}

R_{1}={\frac {5*2}{3+5+2}}=1,R_{2}={\frac {3*2}{3+5+2}}=0.6,R_{3}={\frac {3*5}{3+5+2}}=1.5

Now Thevenin's resistance can be solved by parallel and serial combinations:

R_{th}={\frac {1}{{\frac {1}{8}}+{\frac {1}{10.6}}}}+1.5=6.0591

Which is the same value found through source injection.

This article is issued from Wikibooks. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.